Feature

ATC tool spindle on twin-turret machine
  • X and Y axis travel ensure a wide machining range. X-axis travel 125mm below spindle center ensures a wider machining range.
  • Highly Rigid Design. All units are located on the main frame vertically for high rigidity
  • Operator friendly design. Spindle center is easy to reach, thanks to 450mm distance from the machine front and 1100mm height from the floor.
  • New operation panel with NT Smart X featuring. Operation Level Management,Camera,Voice Guidance,Production Management and 3D collision check, all included as standard.
  • Modular design. Choose from R-spindle type or tailstock type

Photo&Movie

Machine Specification

R-spindle Specification
Capacity
Max.turning diameter / Max.turning length 640mm / 1,100mm
Distance between spindles max.1,350mm / min.250mm
Bar capacity Φ65mm (op.Φ71,Φ80,Φ90)
Chuck size 254mm(10")
Axis travel
Slide travel X1 / Z1 / B2 700mm / 1,125mm / 1,100mm
Slide travel Y ±125mm
B-axis positioning range 225°(-120°、+105°)
Left Spindle
Spindle speed 4,500min-1
Spindle motor 15/11kW (op.22/18.5kW)
ATC
ATC Number of tools 40 (op.60,80,120)
Tool spindle
Tool spindle speed 8,000min-1 (op.12,000min-1)
Tool spindle motor 22/15kW
Tool shank type CAPTO C6, (op. HSK-A63)
Right spindle
Spindle speed 4,500min-1
Spindle motor 15/11kW (op.22/18.5kW)
General
Floor space(L×W×H) Included chip tank 4,460mm×2,670mm×2,615mm
Tailstock Specification
Capacity
Max.turning diameter / Max.turning length 640mm / 1,100mm
Distance between spindles max.1,350mm / min.250mm
Bar capacity Φ65mm (op.Φ71,Φ80,Φ90)
Chuck size 254mm(10")
Axis travel
Slide travel X1 / Z1 700mm / 1,125mm
Slide travel Y ±125mm
B-axis positioning range 225°(-120°、+105°)
Left Spindle
Spindle speed 4,500min-1
Spindle motor 15/11kW (op.22/18.5kW)
ATC
ATC Number of tools 40本 (op.60,80,120本)
Tool spindle
Tool spindle speed 8,000min-1 (op.12,000min-1)
Tool spindle motor 22/15kW
Tool shank type CAPTO C6, (op. HSK-A63)
Tailstock
Driving Methods NC control servo driven
Tailstock postioning stroke 1,100mm
Rapid feed rate 8,000mm/min
Tailstock spindle taper size MT-5
General
Floor space(L×W×H) Included chip tank 4,460mm×2,670mm×2,615mm
HOME > Products > NTRX-300

PAGETOP